Skip to main content
MenuClose menu

Guide · For car owners

Should you fix rock chips and swirls before PPF goes on?

Fix the chips you do not want to keep seeing before the film goes on. Clear film seals in whatever is underneath: a chip stays visible through it, and a deep one can show as a small dip in the film. Swirls are the same, so paint correction, where the paint needs it, comes before the film, never after.

Why film does not hide a chip

Clear film is meant to disappear over the paint, and that is exactly why it does not hide what is in the paint. The chip is still there, now under a clear, glossy layer that can make its edge easier to see.

A deep chip is also a hollow. Film laid over it bridges the gap, and the dip can show as a small mark in the film’s surface.

Repair, touch up or leave it

There is no single right answer. It depends on how deep the chip is and how much it will bother you.

If a panel is repaired or repainted, the body shop that painted it is the one to say when it is ready for film. The ARK warranty covers film on a professionally refinished, fully cured panel the same way as film on original paint. Tell the shop fitting the film which panels, and when.

  • A chip through to the primer or the metal: have it repaired first. It is also where moisture gets in.
  • A small chip you can only see up close: a careful touch-up, or leave it and accept it.
  • A front end covered in chips: ask whether a repaint of that panel makes more sense than film over the damage.

Do you need paint correction before PPF?

Paint correction means machine polishing the clear coat to take out swirls and light scratches. If the paint has marks you do not want kept, correction comes first, because once the film is on, those marks are sealed under it.

Paint in good condition needs little or none. A new car usually needs the least. The shop should look at the paint and tell you which it needs before it quotes.

The step nobody sees

Every panel is washed and decontaminated before film goes on, whether or not it is corrected. Tar, iron and road film left on the paint end up under the film, and dirt under an edge is where lifting starts.

Who does what

Chip repair and repainting are body-shop work. Washing, decontamination and correction may be done by the shop fitting the film or before you bring the car in: ask whether the quote includes them, and who does the repair if one is needed.

A useful quote lists the preparation separately. What drives the price of a PPF job.

The honest limit

Even a good repair can still be seen

A touch-up fills a chip; it rarely makes it invisible, and clear film over it will not either. Decide before the film goes on whether you can live with what remains, because afterwards it is sealed in.

Where to go from here.

The films

  • DefenderGloss. The thick clear film, for the driver asking how much stone a hood can take before it chips.Explore Defender
  • FusionCeramic gloss. Clear gloss film with the water-repellent layer in its own top coat, for the buyer weighing film plus a separate coating.Explore Fusion
  • Find a shopARK film is installed by authorized dealers. Tell us the car and we match you with one.Find a shop
A dark, empty detailing bay at night seen down its centre line: one dark saloon parked at the far end under a cool white ceiling light, whose reflection runs across the polished floor.

Ask about your car.

info@arkppf.comA person reads it, and answers within one business day.